Quick and Easy DIY Deck Installation

Quick and Easy DIY Deck Installation
Quick and Easy DIY Deck Installation.

The first step of a Quick and Easy DIY Deck Installation is to secure the ledger board to the building. Position it low against the building and brace it in place. Then, use a nailer to secure the board to the wall. Use 3/8-inch lag bolts that are spaced two inches apart to anchor the board to the building. Alternatively, you can fit the joists into the bases of the post anchors.

Once the foundation is secure, you can begin to build the deck. Depending on the size of your yard, you can build a deck that extends two to four inches higher than the ground level. Using a string level, you can create a level line and mark it with a stake. If you don't have a string level, use a second one to measure the height of the first corner.

Before you proceed to installing the deck, you should establish the height of the building. Determine the height of the house by measuring the doorway and the floor of the deck. You should set the deck's height two to four inches below the ground level. A two- to four-inch step will prevent water from getting inside the building. Then, drive a stake at the desired height. You can use a string level to make a level line and place it at the second corner.

To start building, you should determine the height of the deck. Measure the height of the house and the doorway. You should place the deck about two to four inches below the floor level of the house to prevent water from entering the building. Next, drive a stake at the height you want the deck to be. After you have secured the stake, you can use a string level to check the height of the string. Once you are sure that everything is level, you can begin framing the deck by attaching the rim joist and interior joists and beams.

After you've laid the joists, attach the footings and railings. Then, you can install the stair railings. As the stairway is on an angle, the posts should be anchored to the stringers. Afterwards, you can attach the decking material and balusters. You can also add built-in benches and planters. You can also install privacy screens or pool surrounds.

You'll need to set a level base before you can install the deck. The foundation should be concrete blocks or gravel. To ensure levelness, you can use stakes and string levels to level the outline. Once the decking is in place, you can add accessories such as planters and benches. You can also create a pool surround. You can also place an umbrella or a cover over the pool to protect it from the elements.

Visit More!


Keep Visiting SameReview for Latest Review News Tech Updates, Must Like, Share Comment on our FB page, Share your views in comments below.
Tags

You may like these posts

Show more