Steps to Winterize Your Heating System

Before the cold winter months arrive, take the time to properly winterize your heating system. First of all, it's important to shut off the water to your home. You should know the shutoff valve, but if you don't know where it is, consult your local plumber. Next, drain your interior pipes and the water heater. If necessary, install low temperature and water flow sensors. Be sure to connect these to an alarm system. If you don't have the tools needed, use a compressed air compressor to blow the air through the pipes. Otherwise, call a professional to help you.

Depending on the type of heating system, you may have to perform additional winterization measures. Before you turn off your heating system, make sure to shut off the water supply to the home. You can do this by disconnecting the water supply from the water heater and turning off the valve that leads to the intake line. This will prevent any water from flowing into the system. Afterwards, make sure to check the filter and the antifreeze to ensure the system is in good working order for the cold weather.

Before putting your heating system on the winter shutdown, turn off the water supply to your house. A lever valve controls water and prevents water from entering your heating system. Once this is done, you can shut off your water heater and run it for a period of time. Then, open the faucets and let the water drain out. If your heating system has any leaks, contact your local plumbing company or HVAC professional.

If you have an elaborate heating system, you will have to take additional steps to properly winterize it. In addition to draining the boiler unit, you must also loosen bleeder pins in radiators, and apply a winterization sticker to your boiler. Your local inspector may have specific instructions for your type of heating system. Be sure to document the entire process, including images. When possible, put up a sign about the winterization process in conspicuous places so that people will remember to do it.

The first step in winterizing your home is to turn off the water. This prevents water damage from frozen pipes in the building. If you shut off the main water valve, the damage will be minimal. If the valve remains on, the damage can be disastrous. As a result, you'll want to take care of the system before the cold weather arrives. In addition to shutting down the main hydrant, you should also check the heating system's temperature.

The second step in winterizing your home is to ensure the ventilation system is working properly. The HVAC system includes both mechanical and passive components. If the ducts are not adequately insulated, they won't protect your home from the cold. Adding a vapor barrier to the vents is a smart idea to prevent the outside air from affecting the temperature of your house. In the long run, this will ensure that your home is safe and comfortable during the cold months.